ESP 415T1 Surge Protection Series are a Combined Type 1 and 2 tested protector (to BS EN 61643) for use on the main distribution board, particularly
where a structural Lightning Protection System (LPS) is employed, for equipotential bonding. For use at boundaries up to LPZ 0 to protect against
flashover (typically the main distribution board location) through to LPZ 2 to protect electrical equipment from damage.
Nominal Voltage - Phase-Neutral Uo (RMS): 240 V
Maximum Voltage - Phase-Neutral Uc (RMS): 415T1/25-275V, 415T1/12.5-300V
Temporary Over-voltage TOV UT (1): 337 V / 442 V
Short Circuit Withstand Capability: 50Ka / 50Hz
Frequency Range: 47-63 Hz
Max. Back-up Fuse: 415T1/25 315A, 415T1/12.5 250A
Leakage Current (to earth): 415T1/25 5µA, 415T1/12.5 600µA
Volt Free Contact: Push-fit connection for conductor up t0 1.5mm2, rated AC 250V, 1A
Temperature Range: -40°C to + 80°C
Connection Type: Screw Terminal
Conductor Size (solid/stranded): 35mm²
Earth Connection: Screw Terminal
Protection: IP20
See Downloads Tab for full Datasheet